Supplied Database Template

The supplied database is based on the following template.

Circ. Desc.:        Categorize the circuit type - analog, digital, etc

Condition:        Conditions needed to recreate test

Channel A:        Test point for channel A

Channel B:        Test point for channel B

Test Leads:        Leads used on each channel

Vehicle:            Vehicle or model ID of device unit under test

Job Name:        A group name for related system tests

Model::          Fluke  192B  Ver. 7

Description

Describe what is seen in the waveform

Application

Generic application of the setup

Reasoning

Reasoning for the settings of the setup

Setup

(Details of the setup so that it can be used for manual setup of different scope versions.)

CHANNEL A

PROBE CALIBRATION = 1:1

VOLT/DIV = 500mV

 COUPLING = AC

 BANDWIDTH - 10kHz (HF reject)

CHANNEL B

PROBE CALIBRATION = 1:1

VOLT/DIV = 500mV

 COUPLING = AC

 BANDWIDTH - 10kHz (HF reject)

TIME/DIV = 1ms

TRIGGER:

   SOURCE = Channel A

   MODE = AUTOMATIC

   SLOPE = NEGATIVE

GLITCH DETECT = On

SCOPE | READING 1 = On A / V ac

Connection

What is needed for scope, test lead and system connection.

Analysis

Generic considerations for signal analysis.

Notes

Unique related information