AES LineSpi
OBDII data line monitor and breakout box
The AES LineSpi is a 'pass through' breakout box for the OBDII DLC (diagnostic link connector). The AES LineSpi offers easy access to the OBDII DLC for safe probing and testing without the fear of shorting across pins and without the need to be a contortionist.
BENEFITS
| • | - Eliminate the need to probe at the DLC. |
| • | - Access each of the 16 DLC pins while scan tool communicates with vehicle. |
| • | - LEDs to quickly indicate DLC power or ground problems. |
| • | - LineSpi mimics the DLC connector layout for quick reference. |
| • | - Use the BOB as an extension cord for your scan tool. |
| • | - Quick, safe and convenient access to chassis ground and power through the DLC connector. |
FEATURES
| • | - Has two operational modes: Diagnostic - LineSpi circuitry is decoupled from DLC lines. Activity: LED operational and indicate protocol. |
| • | - Uses safety banana sockets that accept all types of 4mm banana plugs including those with safety sheaths. |
| • | - Socket layout mimics DLC connector. |
| • | - LEDs to indicate activity: |
| • | Yellow LED's light up to show communication with scan tool and for communication protocol identification. |
| • | Green LED's on grounds (Pin 4 and 5) light up when ground is good. |
| • | Red LED on power lights up when there is power. |
| • | - 4-ft" extension cable with DLC adapter connects to vehicle. |
| • | - Pin 16 input protected with 1.2 amp polyfuse. |
