The Scopemeter comes supplied with many test leads that are designed for general electronics testing. Below is information regarding available after market automotive test leads.
1:1 AES ST3 Shielded test lead This test lead is a little more automotive friendly and is designed for automotive testing. One key feature is a long ground connection. Note that the supplied lead is recommended for non-automotive applications.
|
|
Secondary Ignition (01-12 - Fluke) The secondary ignition pickup connects to the plug wires and is used to view one cylinder's secondary ignition signal at a time. The probe is calibrated to 1000:1.
|
|
Trigger Pickup (01-14 - Fluke) The trigger pickup is used to get a sync signal from a plug wire, which is ideal to stabilize signals that are in relationship to the engine spinning such as crankshaft with a unique ID pulse.
|
|
Amp Probe (03-60) Amp probes are used to measure current. Amp probes have a calibration setting that the instrument can be set to match. Amp probes are ideal compliment to voltage testing.
|
|
EAP (05-762) Backpinning probe is used to access a test point from within weather sealed connector.
|
|
|
|
