Turn on Reference for Active Setup
To turn on an existing Reference for the active setup you can follow the procedure to create a new Reference Waveform and at the final step select ON or OFF.
Turn on Reference from Setup Memory to the Active Setup
A Reference from any setup in memory can be turned on at any time. Note that using this procedure does not change the setup. It just adds the Reference waveform. This means that the Reference waveform could have been captured with completely different settings.
|
Press Save Print to displays the Save / Recall menu
|
|
Press RECALL.. and the RECALL menu opens.
|
|
Use the UP / DOWN arrow keys to highlight the desired memory location.
|
|
Press F3 to RECALL FOR REFERENCE |
